TR5-100/TR5-225/TR5-500/TR5-800/TR5-1000
LIB Industry
| Availability: | |
|---|---|
| Quantity: | |
The LIB Industry's Temperature Control Thermal Cycle Test Equipment drives temperature up and down at high speed while keeping humidity under control. It shortens each cycle, so you can run more cycles in the same lab time. That makes it useful for thermal shock screening and accelerated life testing. It also works as a standard temperature and humidity chamber when you set a slower ramp.
EV Batteries
(IEC 62660-2、IEC 62660-3、ISO 12405)
Automotive Electronics
(ISO 16750-4、IEC 60068-2-14)
Semiconductors
(JESD22-A104)
Aerospace & Defense
(MIL-STD-810、IEC 60068-2-14)
1. Rapid Temperature Transition: The test chamber pairs a high-power chrome-nickel alloy heater with a mechanical compression refrigeration system, driving the workspace up and down at 5 / 10 / 15 / 20 °C/min. Each hot-to-cold transition takes minutes rather than hours, so a program with hundreds of cycles can finish in days instead of weeks. The rate can be matched to your standard and your sample load, and a slower setting turns the same unit into a conventional temperature and humidity chamber.
2. Precise Closed-Loop Control: High-accuracy PT100 Class A sensors feed readings to an intelligent PID algorithm, which adjusts heating, cooling, and humidity output continuously. This control loop holds temperature fluctuation within ±0.5 °C and deviation within ±2.0 °C, and keeps humidity between 20% and 98% RH with ±2.5% RH accuracy. Because the loop reacts at every moment of the ramp and dwell, each cycle repeats the one before it.
3. Even Conditions During Fast Change: A centrifugal fan and optimized duct send conditioned air in at the top and return it at the bottom, forming a vertical forced-convection loop. This spreads heat and moisture evenly through the workspace, so samples in different positions see nearly the same conditions, even while the temperature is changing quickly. The fan count is matched to the chamber volume, and the duct design keeps noise below 65 dB(A), suitable for laboratories and clean rooms.
4. Programmable Unattended Testing: The PID touchscreen controller stores up to 120 programs with 100 steps each, covering ramp rates, dwell times, humidity setpoints, and cycle counts in a single profile. Long multi-stage tests run on their own, while Ethernet and USB connections provide real-time data logging, remote monitoring, and one-click report export. Engineers can follow a test from outside the lab and spend less time inside it.
5. Durable Construction and Complete Protection: The interior is SUS304 stainless steel, which resists corrosion and keeps its strength under high humidity and repeated thermal stress. The exterior is a powder-coated 4 mm A3 steel frame built for industrial use. Leakage current protection, grounding, phase monitoring, and over-temperature shutdown protect operators and samples, so the chamber can run through long, demanding cycling programs with confidence.
| Model | TR5-100 | TR5-225 | TR5-500 | TR5-800 | TR5-1000 |
| Internal Dimension (mm) | 400*500*500 | 500*600*750 | 700*800*900 | 800*1000*1000 | 1000*1000*1000 |
| Overall Dimension (mm) | 900*1050*1620 | 1000*1140*1870 | 1200*1340*2020 | 1300*1540*2120 | 1500*1540*2140 |
| Interior Volume | 100L | 225L | 500L | 800L | 1000L |
| Heat load | 1000W | ||||
| A : -20℃ ~ +150 ℃ | |||||
| Temperature Range | B : -40℃ ~ +150 ℃ | ||||
| C: -70℃ ~ +150 ℃ | |||||
| Temperature Fluctuation | ± 0.5 ℃ | ||||
| Temperature Deviation | ± 2.0 ℃ | ||||
| Cooling Rate | 5 ℃/min | ||||
| Heating Rate | 5 /10/15/20 ℃/min | ||||
| Controller | Programmable color LCD touch screen controller, Multi-language interface, Ethernet , USB | ||||
| Cooling System | Mechanical compression refrigeration system | ||||
| Exterior Material | Steel Plate with protective coating | ||||
| Interior Material | SUS304 stainless steel | ||||
1. Sample Size and Volume: Choose a test chamber whose working space is clearly larger than your load, with clearance on every side so samples never touch the walls or block the airflow.
2. Temperature Range: Pick the low-temperature type that matches your standard, with Type A at -20 °C, Type B at -40 °C, and Type C at -70 °C, all reaching +150 °C on the high side.
3. Ramp Rate: Follow your test standard first, and choose the rate you actually need rather than the highest one, since faster rates raise the cost.
4. Humidity Requirements: Confirm the humidity range you need, up to 20% to 98% RH, and share your full temperature and humidity profile because humidity control is limited at very low and very high temperatures.
5. Customization and Standards: Tell us your standard and the options you need, and we will recommend a model and send a customized proposal within 24 hours.
Q1: What is the difference between this chamber and a standard temperature and humidity chamber?
A: The temperature and humidity ranges are similar. The difference is speed: a standard chamber ramps at about 1 to 3 °C/min, while this fast-change chamber ramps at 5 to 20 °C/min. Faster ramps shorten each cycle and put more thermal stress on the sample.
Q2: Which ramp rate should I choose?
A: Follow your test standard first. If it does not specify a rate, 5 or 10 °C/min suits most electronics and batteries, and 15 or 20 °C/min suits screening and accelerated life tests. Send us your temperature range, sample weight, and cycle count, and we will recommend a model.
Q3: Is the ramp rate affected by sample load?
A: Yes. Heavy or large samples slow the actual rate, because they absorb and release heat. Please give us the sample weight, material, and any heat generated during testing so we can size the system properly.
LIB Industry has made environmental test chambers since 2012. We serve customers in 60+ countries through 29 distributors and 4 overseas service centers. Every chamber comes with a 3-year warranty and lifetime maintenance. Our test chambers are trusted by CERN, Apple, Mercedes-Benz, BYD, Siemens Gamesa, Nidec, and the University of Sydney, many of whom have placed repeat orders.