PHONE

+86-18700875368

Products

Home » Products » Temperature Humidity Chamber » Benchtop Chamber » Small Benchtop Storage Temperature Cabinet for Food Testing

Small Benchtop Storage Temperature Cabinet for Food Testing

 
Hold, age, freeze, and cycle your food samples under controlled conditions in a compact cabinet that fits on a laboratory bench. LIB Industry's Small Benchtop Storage Temperature Cabinet for Food Testing supports common testing temperatures of 4°C, 25°C, 30°C, 37°C, and 40°C, with humidity control from 20% to 98% RH.
 
 
  • Two sizes: 50 L and 80 L. Either one sits on a bench or slides under a worktable.
  • Wide range: From refrigerated storage up to +150 °C. Choose a -20 °C, -40 °C, or -70 °C low-end model.
  • Humidity control: 20% to 98% RH, held within ±2.5% RH.
  • Programmable: Store 120 programs of up to 100 steps each, so one run can cover a full storage plan.
  • Quiet: 65 dBA or below, comparable to a normal office conversation.
  • Supports ISO 16779, ASTM D4332, ISO 2233, ISO 4180, and other food storage and packaging testing standards.
  • Made to your Standards: Share your shelf-life method with us and we will reply with a tailored configuration within 24 hours.
 
  • TH-50/ TH-80

  • LIB Industry

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Shelf-life data takes weeks or months to collect, and a drifting storage condition can ruin all of it. The LIB Industry Small Benchtop Storage Temperature Cabinet keeps your food samples in a steady, documented environment throughout the study. You can run refrigerated storage at 4°C, room-temperature storage at 20–25°C, and accelerated aging at 30°C, 37°C, or 40°C under controlled humidity. For frozen products, you can also set lower temperatures such as -18°C or -20°C and perform freeze-thaw cycling to simulate cold-chain interruptions. These tests help you identify moisture pickup, clumping, softening, oxidation, color fading, and packaging leaks before your product reaches the shelf. Because it is compact and quiet, the cabinet can stand next to the balance, texture analyzer, or sample-preparation station. You do not need a separate chamber room or need to carry samples across the building.


Where Small Benchtop Storage Temperature Cabinet Fits in Your Food Lab

Small Benchtop Storage Temperature Cabinet for Food Testing

Shelf-life studies

(25 °C / 60% RH , 37–40 °C / 75% RH)


Small Benchtop Storage Temperature Cabinet for Food Testing

Dairy and drinks (Typically 4 °C to 40 °C)

Small Benchtop Storage Temperature Cabinet for Food Testing

Frozen and chilled goods (Typically -40 °C to +4 °C)

Small Benchtop Storage Temperature Cabinet for Food Testing

Food Supplements and Ingredients (ICH Q1A; typically 25 °C / 60% RH)

Small Benchtop Storage Temperature Cabinet for Food Testing

Food Packaging

(ASTM D4332, ISO 187, 23 °C / 50% RH)

Small Benchtop Storage Temperature Cabinet for Food Testing


Food Research & QA

(Customer-specific procedures)


Advanteages of the Small Benchtop Storage Temperature Cabinet for Food Testing

1. A full storage plan in one test chamber: Without switching equipment, you can move from a refrigerator-style hold to a warm, humid accelerated test, then on to a freeze-thaw trial. Build the whole sequence on the controller and let it run unattended overnight or over a weekend.

2. Conditions you can trust: Temperature holds within ±0.5 °C and humidity within ±2.5% RH. PT100 Class A sensors read the chamber air, and the PID controller adjusts continuously. Stable conditions mean differences between sample groups come from the food, not from the equipment.

3. Even exposure on every shelf: Air flows through the chamber in alternating directions, which keeps hot, cold, wet, and dry pockets from forming. A sample at the back corner gets the same treatment as one near the door.

4. Built for a food lab: The interior is SUS304 stainless steel, which tolerates humidity and wipes clean between batches. The outside is powder-coated A3 steel that handles spills and routine cleaning. A recirculating water loop cuts down on manual refilling.

5. Simple to program, easy to document: The 7-inch color touchscreen lets you set up cycles in minutes. Ethernet and USB connections let you log data in real time and export a report in one click for your quality files.

6. Several layers of protection: The cabinet protects against humidifier dry-burning, over-temperature, over-current, high refrigerant pressure, water shortage, and earth leakage. A long-running study has a much lower risk of ending in a failed run.


Technical Parameters of the Small Benchtop Storage Temperature Cabinet for Food Testing

Model TH-50 TH-80
Internal Dimension (mm) 320*350*450 400*400*500
Overall Dimension (mm) 820*1160*950 900*1210*1000
Interior Volume 50L 80L
Heat load 1000W
Temperature Range A : -20℃ ~ +150 ℃
B : -40℃ ~ +150 ℃
C: -70℃ ~ +150 ℃
Temperature Fluctuation ± 0.5 ℃
Temperature Deviation ± 2.0 ℃
Humidity Range 20% ~ 98% RH
Humidity Deviation ± 2.5% RH
Cooling Rate 1 ℃ / min
Heating Rate 3 ℃ / min
Cooling system Mechanical compression refrigeration system
Controller Programmable color LCD touch screen controller
Ethernet connection
Safety Device Humidifier Dry-combustion protection; Over-temperature Protection; Over-current Protection;
Refrigerant High-pressure protection; Water Shortage Protection; Earth leakage Protection
Exterior Material Steel Plate with protective coating
Interior Material SUS304 stainless steel
Thermal Insulation Polyurethane foam and insulation cotton
Observation Window Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration 1 Cable hole (Φ 50,) with plug; 2 shelves
Weight 190kgs


Video of the Small Benchtop Storage Temperature Cabinet for Food Testing


FAQs on the  Small Benchtop Storage Temperature Cabinet for Food Testing

Q1: Can one cabinet handle both chilled storage and accelerated aging?

A: Yes. Even the Type A model covers refrigerated holds, room-temperature storage, and hot, humid accelerated conditions. Types B and C also reach deep-freeze temperatures for frozen products.

Q2: Can I simulate a cold-chain break?

A: Yes. Build a program that holds the samples cold, raises the temperature for a set period, and returns them to cold storage. You can repeat the loop as many times as the plan requires.

Q3: How is accuracy verified before shipping?

A: Every test chamber is calibrated at the factory. Nine temperature probes are placed throughout the chamber, and their average readings are compared with the reference standard. Humidity is calibrated using the dry/wet bulb method.


About LIB Industry

Founded in 2012, LIB Industry builds environmental test chambers for customers in more than 60 countries, supported by 29 distributors and 4 overseas service centers. Every test chamber carries a 3-year warranty and lifetime maintenance. Our test chambers are used by CERN, Apple, Mercedes-Benz, BYD, Siemens Gamesa, Nidec, and the University of Sydney, and many of these customers have ordered again.

Previous: 
Next: 
Get A Quote Now
Related Products
LIB Environmental Simulation Industry has been manufacturing and selling environmental test chambers since 2012, including design, manufacturing, as well as global sales and service.
LIB Industry's comprehensive product range includes temperature and climate chambers, corrosion chambers...

QUICK LINK

PRODUCT CATEGORY

Leave a Message
Get A Quote Now

CONTACT US

   +8618700875368
   +86-29-68918976
 +86-18700875368
  No.6 Zhangba First Street, High-Tech Area, Xi’an City, Shaanxi Province, P.R. China 710065
Copyrights  2025 LIB Industry. All Rights Reserved. Sitemap | Privacy Policy