LIB water spray chambers support a full range of waterproof testing, from dripping to high-pressure jets. Compatible with standards such as IEC 60529 (IPX1–IPX9) and ISO 20653, they suit products requiring verified water ingress protection.
IEC60529
The protection capability of electrical equipment enclosures against water intrusion of different intensities, ranging from slight dripping (IPX1) to high-pressure and high-temperature water flow (IPX9K).
ISO 20653
For protection grades of road vehicles, particularly supplementing the more stringent high-pressure water spray for automotive electronics (such as IP4K, IP9K).
IEC 60598-1
Regarding the testing of luminaires, it is similar to IEC60529 IPX9K, but a new test condition of 15℃ has been added.
MIL-STD-810H Rain Test
Including procedure 1: Rain and blowing rain, procedure 2: Excessive Exaggeration,procedure 3: Drip test.
ISO 16750-4
For road vehicles, electrical and electronic equipment, simulate the thermal shock phenomenon when cold water splashes onto high-temperature systems/components.
LV124
Electrical and electronic components in passenger vehicles with a load capacity not exceeding 3.5 tons, 9.10 Protection against water - IPX0 to IPX6K
SAE J575
Test method for vehicle lighting fixtures and components with A total width less than 2032mm,Water Spray Test t Type A/B
UL 50/50E
Environmental protection for enclosures of electrical equipment, including drip test and rain Test
JIS D 0203
Japanese Industrial Standard - Test methods for moisture and water resistance of automotive parts, including M1,M2,R1, R2,S1,S2,D1,D2,D3.
GMW16001
Penetrating leakage assessment, including seal water absorption test, low-pressure spray test, immersion test, absolute minimum seal compression test, and high-pressure spray test
JSS 55555
Environmental test method for electronic and electrical equipment of the Ministry of Defence of India: Water is sprayed from 8 nozzles at a static pressure of 200 kPa ± 15%.
